Kenworth Dash Lights Meaning

Every commercial truck driver should be aware of the Kenworth dash lights symbols on their Kenworth semi-truck, as they provide an important source of information about the status of various systems. Knowing what each symbol means can help drivers make informed decisions and take appropriate action when needed.

Most Common Kenworth Dash Lights and Meaning

most common kenworth dash lights and meaning
most common kenworth dash lights and meaning

Common Kenworth dash lights include those for oil pressure, fuel level, engine temperature, tire pressure and ABS system issues. Each light has a distinct meaning that indicates either a fault or necessary action to be taken; understanding these signals can assist in avoiding dangerous road conditions and costly repairs. It is essential for drivers to become familiar with all the symbols displayed on their Kenworth dashboards so that they are able to act quickly if any issue arises while behind the wheel.

Kenworth Malfunction Indicator Lamp

kenworth malfunction indicator lamp
kenworth malfunction indicator lamp

The Malfunction Indicator Lamp (MIL) is a yellow image of an engine block that appears on the dashboard of Kenworth semi-trucks. It serves as a warning to drivers that maintenance needs to be done or there may be an engine problem. If the light is blinking or turns red, it indicates that there is a more serious issue and requires immediate attention. Drivers should safely pull up and turn off their engines if they see either of these conditions in order to prevent further damage from occurring. Other messages or symbols may also appear alongside the MIL which can provide more clues as to what might be wrong with the vehicle.

It’s important for drivers to pay close attention when they notice the MIL lighting up on their dashboards, as this could indicate something wrong with their vehicles’ engines that needs fixing by an experienced mechanic immediately. Taking care of any issues early will help ensure safe operation of your Kenworth semi-truck and avoid expensive repairs down the line due to neglecting small problems before they become larger ones.

Kenworth Kingpin Lock

kenworth kingpin lock
kenworth kingpin lock

Kingpin Lock is a reliable symbol of an unlocked padlock that looks like a double-pin. It attaches to the kingpin of semi-trailers, providing prevention against unauthorized coupling and towing. Should Kingpin Lock come on while in use, it will alert the driver to lock the kingpin immediately as this is essential for dissuading any potential theft or misuse. Drivers must always ensure they have locked the kingpin securely prior to leaving their vehicle unattended in order to guarantee no one can make away with their trailer without permission.

Kenworth Engine Heater

kenworth engine heater
kenworth engine heater

An engine heater is a useful tool that serves to warm the engine and fluids before starting. It does this by warming up the coolant, which in turn prevents possible damage from cold starts and idling. When an engine heater switch is turned on, a light or indicator will typically appear – if this appears at any other time, then it can indicate a fault with the system. In such cases, it is recommended that truck owners take their vehicle to a qualified mechanic for further analysis as soon as possible to ensure proper operation of the engine heater.

Kenworth Truck Body Up

kenworth truck body up
kenworth truck body up

The Truck Body Up Indicator is a red symbol resembling the image of a dump truck with its body raised. This indicator serves as an important reminder for drivers to lower the trailer before driving away, as doing so reduces the chance of overhead collisions and other safety issues. When this warning light appears, an accompanying alarm usually follows it in order to gain attention. It is essential that all operators ensure that the body remains lowered if no content is being offloaded from the truck.

Kenworth Trailer Body Up

kenworth trailer body up
kenworth trailer body up

The Trailer body up is a red symbol that alert personnel working with the dump trailer of its raised position. It is important to lower the body of the trailer in order to prevent overhead collisions and other potential dangers from occurring. Lowering the trailer body will help increase safety protocols, making it essential for those working around these trailers to stay aware and alert at all times.

Kenworth Filter Regeneration

kenworth filter regeneration
kenworth filter regeneration

This filter regeneration indicator consists of two-column circles sandwiched by bars and smoke trails. It is usually marked with a yellow or amber symbol, indicating that regeneration is overdue. Generally, filter regeneration will happen automatically when driving; however if this does not occur, it can be done manually by accelerating to 50 mph and maintaining the speed for a certain period of time. This process is necessary in order to burn off excess soot deposits which would otherwise result in the emission of harmful dark smoke whenever the vehicle accelerates.

Kenworth Transmission Temperature Light

kenworth transmission temperature light
kenworth transmission temperature light

The Kenworth dashboard features a yellow/amber transmission temperature light in the shape of a toothed circle with a thermometer inside. This warning light is designed to illuminate when the transmission system begins to overheat, which can be caused by either low fluid levels or mechanical faults in the cooling system. Immediate action should be taken when this indicator appears on the dashboard; drivers must pull over and turn off their truck as soon as possible, then seek out an auto repair shop for further inspection and repairs. Ignoring this warning could result in severe damage to your vehicle’s engine or transmission system.

Kenworth Air Suspension Dump

kenworth air suspension dump
kenworth air suspension dump

The air suspension dump indicator alerts the driver of a truck when the switch is activated on the dashboard to lower or raise the rear by dumping air from the suspension bag. If it appears at any other time, this could indicate an issue with the system and a qualified mechanic should be consulted for further inspection. An air suspension system can provide improved ride quality depending on speed and load, as well as helping to reduce bouncing over rough terrain when unloaded.

Kenworth Check Transmission

kenworth check transmission
kenworth check transmission

The check transmission indicator is a toothed or rugged circle with an exclamation point inside. This light signals that something is wrong with the truck’s transmission system, usually due to overheating or damage of internal components often caused by low transmission fluid. When this warning light appears on the dashboard, it may be accompanied by symptoms such as slipping out of gear, maintenance reminder, and/or low transmission fluid level.

For safety reasons, it is important for drivers not to ignore this warning sign when they see it on their dashboards. Instead, they should take their vehicle immediately to a dealer or auto repair shop for diagnosis and repair in order to ensure proper functioning of the vehicle’s transmission system.

Kenworth Crane Up Warning

kenworth crane up warning
kenworth crane up warning

The crane up warning light is a feature available on certain Kenworth trucks that are fitted with cranes. When the arm of the crane is raised, this light will turn on and remain illuminated as long as it is in an upward position. To avoid potential overhead collisions or other related dangers, users should lower the arm when they are finished using it. This warning light serves to keep drivers and personnel safe while operating their vehicle with a crane attachment.

Kenworth Traction Enhancement

kenworth traction enhancement
kenworth traction enhancement

The traction enhancement symbol, which is identical to the air suspension dump symbol, consists of two arrows pointing to the truck bed. This is used when additional weight needs to be applied in order to improve traction on snowy roads; however, it should not be utilized if driving on a dry road. The added loads should be removed for safety and optimal performance under these conditions.

Kenworth Brake Failure

kenworth brake failure
kenworth brake failure

When a truck driver sees a brake failure indicator, which is a red symbol with an exclamation point inside of it and has arcs representing brake pads on both sides with BRAKE written below it, they should stop their vehicle immediately and pull over. This warning light indicates that there is an issue within the braking system that can result in potential failure. It is important to contact your mechanic to address any issues related to the brakes for everyone’s safety on the road.

Kenworth Emission System Temperature Warning

kenworth emission system temperature warning
kenworth emission system temperature warning

This Kenworth dash lights are a thermometer and trail of smoke combination, which lights up if the temperature is hotter or colder than the recommended value. The emission system needs to operate at optimum temperature in order for it to convert carbon monoxide and other hazardous gases into safer versions. If this does not occur, then the dashboard indicator will come on as an alert. It is advised that truck owners take their vehicle to an auto repair shop for diagnosis and repairs, in order to follow all applicable emission standards.

Kenworth Reset Overspeed Shutdown Indicator

kenworth reset overspeed shutdown indicator
kenworth reset overspeed shutdown indicator

This engine block with the word RESET inside is an indicator for a Throttle Stop or Overspeed Protection System. This system monitors the RPM of diesel engines and triggers the throttle valve to shut down when over-speeding occurs, which will result in a warning light on the dashboard being illuminated.

Kenworth Engine Brake

kenworth engine brake
kenworth engine brake

The engine brake indicator light is a block shaped symbol within an engine that indicates when the driver’s Jake brake is in use. This enables drivers to slow down their truck without having to rely solely on the service brakes, and the indicator lights up when it has been activated. If this light appears while no brakes are being applied, there could be a problem with the system which should be addressed immediately.

Kenworth Wait To Start Indicator

kenworth wait to start indicator
kenworth wait to start indicator

The Wait to Start indicator is a symbol found on engine blocks that consists of a coil representing glow plugs and the word WAIT below it. This indicates that the glow plugs are working to bring the engine up to temperature in order to start it, usually taking around 5 minutes but potentially shorter with newer models. Once heating has been completed, the indicator light will turn off. If you notice this indicator light staying lit while your engine is running, there may be an issue with your heating system; as such, it’s advisable for you to get in touch with a mechanic or take your truck into a repair shop for further inspection.

Kenworth Refrigerator Indicator

kenworth refrigerator indicator
kenworth refrigerator indicator

The Refrigerator Indicator is a handy device found on trucks fitted with refrigerators or freezers. It is designed to alert the driver when the switch for cooling has been turned on; it appears as a green box with a handle and star-like objects inside. If the Kenworth warning light turns yellow, it indicates an issue with the truck’s refrigeration system that should be addressed before transporting any perishable goods.

Kenworth Pump Mode Indicator

kenworth pump mode indicator
kenworth pump mode indicator

The pump mode indicator is a word symbol that appears on the dashboard of fire trucks or any other liquid carriers. When activated, it will illuminate as “PUMP MODE” to signify that the operator has shifted into this particular function on their vehicle. This feature can be enabled by flipping the switch and allows for pumping out water or whatever content may be inside of the tank.

Kenworth PTO Indicator

kenworth pto indicator
kenworth pto indicator

The PTO indicator is a yellow symbol, denoting a gear with an arced rectangle. It is used to indicate that the Power Take-Offs (PTOs) on trucks have been engaged. PTOs are mechanical gearboxes attached to the truck’s engine, which allow for power transfer to auxiliary components such as hydraulic pumps and cranes. The Kenworth warning light associated with this symbol will illuminate when the gearbox of your truck has been successfully engaged.

Kenworth Trailer Dump Front-Center-Rear

kenworth trailer dump front center rear
kenworth trailer dump front-center-rear

This device, known as a trailer dump indicator, is an essential tool for many professionals who need to transport and dump various materials. It consists of a two dimensional image of a trailer on wheels with a figure resembling a handle. The position of the handle indicates which part of the container should be opened in order to empty out its contents – whether it is at the front, center or rear. A dashboard light symbol will illuminate when that specific part of the container is opened to alert those nearby that dumping operations are underway.

Final Thoughts

The Kenworth truck’s dashboard is equipped with an array of symbols and switches that the operator should be aware of. The most common warning lights and indicators are highlighted, however a thorough understanding can be achieved by consulting the truck manual. Knowing what each symbol or switch entails will enable users to operate their trucks more effectively and safely on the roads.

Understanding the different Kenworth dash lights and their meanings is important for all drivers. Knowing what each light means can help you diagnose issues with your vehicle quickly, as well as take preventative measures to ensure a safe drive. With this knowledge, you can be prepared when a warning light appears on your dashboard so that you can make the right decision in terms of repair or maintenance.

5/5 - (17 votes)

1 thought on “Kenworth Dash Lights Meaning”

  1. I appreciate this article on Kenworth dash lights and their meanings. I drive a Kenworth truck and these lights indicate when something is wrong with the vehicle. Knowing what each of the lights mean is essential for me, as it helps me to know what needs to be fixed quickly. I have experienced problems with the lights not turning on when I need to be alerted to something. I read that it could be a wiring issue, so I checked all the wires and they were all okay. I then figured out that the fuse might be blown and sure enough it was. So I replaced it and I haven’t had any problems since. It’s always great to have a resource like this article to help me better understand the lights on my truck.

    Reply

Leave a Comment

×

Ask an Expert

*Follow this page every hour. We will respond to you regarding the comment you make or the question you ask.